CLS Everyday Cleaner Standard for Commercial Properties

• Shall be free of spots, stains, gum, dirt and debris without causing damage; it shall appear visibly and uniformly clean.
• Adjoining walls, doors, and floor surfaces shall also be free of dust, soil, and cleaner residue.
• Carpets shall be vacuumed with a brush type, dual motor, vacuum (Windsor Versamatic or comparable).
• Carpet will be spot cleaned using hot water extraction.

• Shall appear streak-free, film-free, and uniformly clean.
• Eliminate dust and soil from sills and ledges

• Shall be free of dust, dried-soil, finish build-up and debris.
• These areas shall be visibly and uniformly clean.
• This shall include the elimination of cleaner residue.

• Floors shall have approximately 5-7 coats of a slip-resistant seal and that results in a consistent high shine.
• Floors shall appear visibly and uniformly smooth and clean.
• This shall include the elimination of dust streaks, lint, standing water, cleaner residue and film.

• Shall be free of dust, dried-soil gum, spots, stains and debris.
• Floors shall be cleaned with appropriate product that meets or exceeds flooring manufacturer’s recommended cleaning specification.
• Grout must be kept so that there is uniform color throughout.
• All stone floors will be machine scrubbed and sealed with a stone soap cleaner equivalent to a 3M Cornerstone product.

• Shall be free of dust, dried-soil without causing damage.
• These surfaces shall appear visibly and uniformly clean.
• This shall include the elimination of film, streaks and cleaner residue.

TRACKS

• Shall be free of dirt and debris.
• Tracks shall appear visibly clean.
• This shall include the elimination of standing water from wet cleaning procedures.

LIGHTS

• Shall be free of dust and soil and stains without causing damage. Diffusers shall remain in proper position.
• They shall appear streak-free, film free and uniformly clean.
• Waste and debris shall be removed from ceiling diffusers.

RAILS & WALLS

• Shall be free of dust and dried soil without causing damage.
• These surfaces shall appear visibly and uniformly smooth and clean.
• This shall include the elimination of film, streaks, and cleaner residue or film.

STEPS & LANDINGS

• Shall be free of dust, dried soil, gum, stains and debris.
• These surfaces shall appear uniformly smooth and clean without leaving dust streaks, lint, standing water, cleaner residue or film.